N.B: Decal kits cannot be returned or exchanged.
Please note: You cannot exactly match the colours of the decals with the colour of the original plastics!
DESIGN your own decal kit with your favourite colours!
How to use:
Step 1 - Select name and number
Step 2 - Choose a background colour for number plate (base colour on decal kit)
Step 3 - Choose a colour for your name and number (all kit colours change accordingly)
Step 4 - Choose a colour for decoration
IMPORTANT! If your decal kit contains a tank decal, it must be perforated! Otherwise, there is a high risk that air bubbles will form due to petrol fumes. This is easily done with a razor blade BEFORE mounting.
Contains decals for the following parts:
Radiator Wings/ Tank/ Front Fender/ Rear Fender/ Fork Guard/ Air Can/ Swing Arm/ Number Plates
For this kit, we also offer personalised number plates that are exactly matched to your decal kit so that everything blends together perfectly for a real PRO look!
The decals are manufactured in our own state-of-the-art printing plant and are of the highest quality.
After the decal has been printed with digital printing, it is laminated with a very strong and transparent plastic material that protects against wear.
After this, an acrylate-based glue is applied which sticks the decals down while keeping them removable without leaving glue residue on the plastic.
Mounting:
First, make sure you clean your plastic thoroughly with our pre-decal cleaner or brake cleaner.
This also applies to new plastics, which have oil residues on the surface after manufacture.
The decals should be mounted at room temperature.
Make sure that the decal is well centered on the plastic before you start pasting it. When you are satisfied with the fit, remove the protective film from one corner of the decal and then start to press the decal down firmly.
It is good to have a small cloth/sponge to press down with that easily slides over the decal.
Carefully move forward in straight lines as you press down gently to avoid air bubbles.
For the curved/shaped decals, you can heat the decal gently with a hair dryer/heat gun to make it more pliable.
After mounting, allow the plastic to rest for 24 hours at room temperature before riding to ensure the decals are properly attached.
Please note: You cannot exactly match the colours of the decals with the colour of the original plastics!
DESIGN your own decal kit with your favourite colours!
How to use:
Step 1 - Select name and number
Step 2 - Choose a background colour for number plate (base colour on decal kit)
Step 3 - Choose a colour for your name and number (all kit colours change accordingly)
Step 4 - Choose a colour for decoration
IMPORTANT! If your decal kit contains a tank decal, it must be perforated! Otherwise, there is a high risk that air bubbles will form due to petrol fumes. This is easily done with a razor blade BEFORE mounting.
Contains decals for the following parts:
Radiator Wings/ Tank/ Front Fender/ Rear Fender/ Fork Guard/ Air Can/ Swing Arm/ Number Plates
For this kit, we also offer personalised number plates that are exactly matched to your decal kit so that everything blends together perfectly for a real PRO look!
The decals are manufactured in our own state-of-the-art printing plant and are of the highest quality.
After the decal has been printed with digital printing, it is laminated with a very strong and transparent plastic material that protects against wear.
After this, an acrylate-based glue is applied which sticks the decals down while keeping them removable without leaving glue residue on the plastic.
Mounting:
First, make sure you clean your plastic thoroughly with our pre-decal cleaner or brake cleaner.
This also applies to new plastics, which have oil residues on the surface after manufacture.
The decals should be mounted at room temperature.
Make sure that the decal is well centered on the plastic before you start pasting it. When you are satisfied with the fit, remove the protective film from one corner of the decal and then start to press the decal down firmly.
It is good to have a small cloth/sponge to press down with that easily slides over the decal.
Carefully move forward in straight lines as you press down gently to avoid air bubbles.
For the curved/shaped decals, you can heat the decal gently with a hair dryer/heat gun to make it more pliable.
After mounting, allow the plastic to rest for 24 hours at room temperature before riding to ensure the decals are properly attached.